Promptly wipe up any spilled fluid as it is highly toxic. Always wear safety goggles when working on your Caliber. Refer to Cooling System Draining and Filling. Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Radiator Fans not working check and test fans and coolant sensor 2007 Dodge Caliber 2.4 0 helpful 1 answer Where is the coolant temperature sensor on a 2007 chev uplander 3.9 v6 located Drain the cooling system. All it said was cooling system performance. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle. After reading here, I took it to AutoZone and the guy gave me a code of P2181. Ignoring the CEL warning light can cause more problems down the road. Driving when the check engine is flashing can cause damage to the engine and catalytic converter. Do not operate your vehicle for an extended period. Some coolants will come premixed-that is, you don't need to add any water. If your Dodge check engine light is flashing, it means the ECU has detected an engine misfire. Mix the coolant / antifreeze with distilled water so that you have a combination of 50% coolant and 50% water. Be sure to check your owners manual to determine the correct type of fluid to add - for Dodges, it will typically be in a section titled Fluid Capacities in the back of your manual.
#Coolant engine light dodge caliber how to
The video above shows you where the coolant reservoir in your Caliber is located and how to add coolant / antifreeze. Make sure to check your engine when it is cold for an accurate reading. Engine coolant / antifreeze circulates through your engine to keep it cool in the summer but won't freeze in the winter. Adding engine coolant (also known as antifreeze) to your 2008 Dodge Caliber is pretty easy.
0 kommentar(er)
